Add support to your Cable Tray roller with the addition of these side arms. Used mainly when Cable Ladder is installed instead of Tray. Fixing nuts and bolts are supplied.

More Info

Used to form angles on cable or ladder tray bends. Bolt or tie to individual cable ladder rungs or perforated cable tray. Excellent junction roller when running around bends. Dog bone or Tube Roller can be mounted in either top preference.

Sizes range from 28mm through to 150mm. When access to the duct opening is readily available these guides (slippers) assist in protecting the cable sheath and providing up to a 90 degree angle for cable entry. Not suitable for use when cables are exiting from duct as they are not lockable.

More Info

Corner Trench Cable Rollers are rated at 200kg per roller and can be ganged together by star pickets to form any configuration. Corner Trench Cable Rollers are sold separately but usually purchased in gangs of three to form a sweeping bend. 

More Info

Side View

The occupied trench roller is useful when your trench is already occupied with conduit or existing cable. 140mm alloy bearing roller will accommodate cables to 138mm diameter. Effective in open clear trench where a stand off due to soft soil is required. Also available with a PVC Roller.

Available to suit conduit entries from 35mm through to 200mm. The full bearing roller makes it easier going for entry to or exit from the conduit as well as protect the cable against abrasion from the conduit opening. The Roller can be placed at any angle in the conduit and locked in place. 

More Info